This is a demo code is to provide support for the Curiosity High Pin Count (HPC) development board using the PIC18F47Q10.

This repository is a training module covering basics of GPIO, TCA, TCB, events, USART, CCL and PIT to create simple applications for the ATtinyAVR 1-series.

GitHub Example for the 8bit MDFU Client Library using PIC16F18446 with a CNANO board.

GitHub Example for the 8bit MDFU Client Library using PIC18F56Q24 with a CNANO board.

GitHub Example for the 8bit MDFU Client Library using AVR128DA48 with a CNANO board.

This MPLAB® X MCC example shows implementation of TCP/IP Lite Applications using Microchip ENC28J60 Ethernet Driver on a PIC® Device

This code example demonstrates how to communicate as host and client using SPI protocol in interrupt and polling mode on PIC18F56Q71 with MPLAB MCC Melody.

These labs provide support for the Curiosity High Pin Count (HPC) development board using the PIC18F46Q71.

The ADCC Data Streamer Example, of the MCC Melody ADCC Example Component, used in the Callbacks Implementation. Displays ADCC samples visualized with the Data Streamer. An ADC conversion is taken every 100 ms on the selected analog channel.

The repository contains the Manchester Encoder, an MPLAB® X project, using Core Independent Peripherals (CIPs) by following the interaction between CLB, TMR0 and UART peripherals.

The ADCC Basic Printf Example, of the MCC Melody ADCC Example Component, used in the Polled implementation. ADC Conversions are taken every 500 ms. The LED is toggled and the result is sent to the PC terminal.

This code example demonstrates usage of AVR128DB48 microcontroller to generate 48MHz clock signal using PLL and OSCHF. In this code example, use of Timer/Counter type D (TCD) peripheral to realize peripheral clock frequency of 48MHz is demonstrated.

The ADCC Basic Printf Example, of the MCC Melody ADCC Example Component, used in the Callbacks Implementation. ADC Conversions are taken every 500 ms. The LED is toggled and the result is sent to the PC terminal.

The ADCC Spike Detection Example, of the MCC Melody ADCC Example Component, used in the Polled implementation. ADCC Spike Detection is visualized with the Data Streamer. Modify the Spike Detection Sensitivity to observe the change in sensitivity.

This MPLAB® X MCC example shows implementation of TCP/IP Lite Applications using Microchip ENC28J60 Ethernet Driver on an AVR Device

The TIMER Toggle LED example, of the MCC Melody Timer Example Component, is used in the Polled implementation. The LED on the PIC18F57Q43 Curiosity Nano is toggled, as well as a Debug IO, which can be used to verify the 100 ms period.

PWM control of LED has been added to the ADCC Data Streamer Example, of the MCC Melody ADCC Example Component (Callbacks Implementation). LED brightness is varies with POT-Meter and ADC samples are visualized using the Data Streamer every 100ms.

This project showcases a full duplex communication between two AVR16EB32 Curiosity Nano boards through FSK data modulation and demodulation techniques implemented using timer peripherals.

This repository contains two MPLAB® X projects designed to showcase the 8-Bit MDFU Client library and the ecosystem it creates.

The repository contains the Manchester Decoder, an MPLAB® X project, using Core Independent Peripherals (CIPs) by following the interaction between CLB, SPI and TMR0 peripherals.